If you want to have the ability to multitask with all your devices while enjoying very high speeds, nothing surpasses a wired network. Here, we will show you all the steps you require setting up your own home wired network, from design to cabling, to the finishing touches.

  1. Network design

First, you will have to determine how many rooms you intend to run your wired internet through. This will ascertain most of your price since it will determine the length of cable you should purchase.

Next, you will need to locate a good area for all of the cables to meet at; this is where you will put your router or switch. Remember that you will have multiple wires emerging from your wall at this stage. That is why most people choose to have this area behind a desk or a closet.

As soon as you have located this junction area, try and gauge the distance from this area to the preferred areas in each room. The most convenient way to accurately gauge the length you will need is to visualize connecting a string from where the router is to the wall outlet. You should always overestimate, and consider that you may need to run the wire through the walls, under your home, or even in the attic, says a network engineer at Equustek Solutions Inc.


  1. Choice of cable

Next, you will need to choose the kind of cable that you would like to use. There’s Coaxial, Cat6, and Cat5e. Coaxial is usually used for television, Cat6 cable is ten times faster compared to Cat5e. Wiring your home will require a long time, and it is advisable to do it right the first time.

If you do choose to use Cat6, there will be some more options. There will be STP and UTP types of cables, where the S and U symbolize shielded and unshielded. Shielded is a lot more costly since it adds a protection layer on the outside of the cables. The unshielded is ideal for use inside the house.

Next, there’s the choice of stranded and solid core wire. This simply means that your wire’s interior comprises of either one solid piece or braided strands. You will need to know how much maneuvering you should do with the wire. If you want to pass the cable through tight spaces, a piece of solid wire is a lot simpler to maneuver in a limited space since it is stiff. The disadvantage in the solid core is that it’s difficult to connect to a plastic jack or wall outlet. Stranded wire is simple to connect to a wall outlet; however, it is quite fragile if you are attempting to force it through fissures.

Finally, a wire that is “in-wall rated” is the best to go for. You should not get anything industrial since this helps keep the costs down.


  1. Wire the cable

Now that you have made a rough approximation of the of the type and length of the cable you will require, the areas of the outlets, and the perfect spot for the junction box, it is time for you to consider how you will get the cable from Point A to Point B.

There are many factors here to consider. All homes are constructed differently and have different points of access. Some people can access their attic without difficulty. Unless you have a lot of experience with electrical installation and drywall, make sure you check with a builder or at least an experienced person before you start damaging high voltage lines and waterlines from inside the walls.

Image source